7 Tips For Fixing A Car Dent

You can do so at home if you have a dent in your car shell and need to fix it. The repair won't be as good as one done by an expert body shop, but it'll be better than nothing! There are many tips and tricks for fixing dented cars, so we've rounded up some of our favourites here.

1. Examine the damage.

Remove any debris from around the dent and ensure there are no sharp edges that could cause further damage if you hit them with an object like a hammer or screwdriver.

If paintwork is damaged, use touch-up paint that matches your car's colour.

2. Trim out any loose paint chips.

If you have a dent that has pulled away from the body of your car, use a paint chip remover to remove any loose paint chips. If still, some stubborn ones remain, use a small putty knife or sanding block to scrape them off as well.

3. Use a dent puller to pop out the dent from inside the car.

If you can access the dent, use a dent puller to pop out the dent from inside the car. A dent puller is a tool that looks like an ice pick with a wiggle handle on top of it. Use it by inserting it into the crease of your car's body panel and then twisting back and forth until you feel resistance; this will force out any trapped air inside of your car's bodywork, making it easier for you to smooth out dents in this area by hand afterwards.

When using this method for removing dents from inside your vehicle, make sure not to hit any other parts of its frame or frame rails (they're those metal bars going across under where passengers sit). If done incorrectly, this could cause further damage!

4. Apply body filler to the dented area, then sand it smooth when dry.

When the body filler is dry, sand it smooth. This can be a messy process and should be done outside. Sanding will remove any bumps or ridges from the surface of your car's paint job, so make sure you have plenty of rags on hand to wipe away debris as you work.

5. Last but not least, paint or clear coat your repair to protect your work!

The last step in your car dent repair is to paint or clear coat your repair to protect it and ensure no further damage occurs. To do this, you'll need to mask off the surrounding area with a guide coat and then prime the surface to seal it from rust.

Once everything has been masked off and primed, use high-quality paint that matches your car's colour to finish painting out any remaining dents. Finally, apply a clear coat of protection so that wear and tear don't ruin all of your hard work!

There are many ways to fix a dent in a car shell - whether it's at home or in the workshop

The best way to fix dents in a car shell is by taking it to a professional. They'll have the experience and tools necessary to ensure your car gets back into shape quickly, safely and correctly. If you can't afford the cost of taking your vehicle out of commission for days or weeks on end, however, there are plenty of ways to try fixing dents at home.

Dent removal hammers come in many shapes and sizes, but they all work similarly: they're made up of two parts: one part that holds the hammer head firmly while allowing it to move freely around inside its casing, and another part which attaches directly onto this internal bounce hammer head with screws or bolts through holes drilled into its sides.

Conclusion

The best way to fix a dent in your car is with the right tools and knowledge. If you need help with how to proceed, it's worth getting professional help from someone who knows what they're doing!