How to fix Netgear router not working?
This post is all you need when the Netgear router is down. can perform router troubleshooting related to many Netgear router not working problems. Any Wi-Fi router could have a performance-related issue that can disrupt your Internet connection. Read this post to the end and let's get started with basic troubleshooting of your Netgear wireless router.
Why is the Netgear router not working?
Now this is something you need to pay attention to and understand the problem. If the router has stopped working or your router is not working after reboot, the following problems may cause the internet outage
- Netgear router / modem overheating
- internet cut or isp disconnection
- Outdated firmware or configuration change
- A security breach or incorrect configuration
- A faulty cable or other technical failures
Wi-Fi issues such as overheating, ISP disconnection, configuration change, firmware update, or security connection could be the cause of router issues. To troubleshoot Netgear router not working, try these steps below.
Netgear router troubleshooting
Friends, there is no rush to reset your Netgear wireless router to fix the wifi router problem. Try these steps and consider restarting the router as the last option. You will be surprised to know that most router connectivity problems can be solved with a simple reboot or power cycle.
Restart your internet modem and your router. Take out the power cord from the router and the modem. Wait 10 seconds before reconnecting. After that, restart your computer as well.
Wait 1 minute and look for the internet light on your modem and router. If you see the internet light on the modem, that means the modem is fine and you are getting internet from the internet service provider side.
Now look for the internet light on your router. Try using the internet and see if the reboot helped or not.
After you're done with this process, let's test your internet service provider's connection and modem.
How to keep a Netgear router safe
Your wireless router transmits a signal through the air and can be detected hundreds of feet away. By default, anyone close to you can use your network. It is highly recommended that you take some simple security measures, such as encryption and also limiting access to your wireless network.
Encrypting information that is transmitted over the air is the best way to protect communications from spies. The two main types of encryption are Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP). WPA2 is the best option, but many older routers do not have this option. If your router doesn't have WPA2, you need to update it.
The bottom of the router is labeled with the default access site and credentials.
With a computer that is connected to the Netgear router, open a web browser (such as Safari, Google Chrome, or Internet Explorer).
Go to http://www.routerlogin.net
Enter the username and password of the router.
2 Choose a strong password
Whenever possible, you should choose a password that is impossible to guess and is also resistant to brute force attacks.
3 Change network password
Select Wireless. For an older router, the option may be called Wireless Settings.
If you want, you can change your network name (SSID) at this time. This is the easy-to-use name that will appear when searching for wireless networks in the area.
- Under Security Options, select WPA2-PSK [AES].
- Enter the password you chose in the Password field.
- Make a note of your network name (SSID) and password, as you will need them to connect your devices to your Wi-Fi network.
- Select Apply to save the new settings.