Install the right type of fire sprinkler in your commercial building!

Fires cause annual losses of millions of dollars for businesses. A commercial fire is a disaster that endangers people and destroys property. In the aftermath of the fire, many businesses could never get back to where they had been.

As a result, every business owner must be aware of the factors that contribute to commercial fires to mitigate possible catastrophes' impact. Because firefighters can only respond to a fire after it has already spread, it is critical to engage a reliable fire extinguisher service to install fire sprinklers or other fire safety equipment on your premises.

Sprinkler systems have been used to save lives and prevent damage to buildings for many years. Therefore, a company owner's best course of action should be a commercial fire sprinkler system installation. A fire sprinkler system appears simple at first appearance, with its sprinkler heads just spraying water on the flames. But actually, this is a complicated system that requires proper installation, maintenance, and repair from experts.

If you're not sure what kind of fire sprinkler system will be best for your business. Given the diversity of fire sprinkler systems, this article can be useful in narrowing down the options. Depending on the safety level of the system and your personal preferences in protective gear, several different choices can be made accessible to you.

1. Wet Pipe System-

This type of fire sprinkler is the most common and traditional. Wet pipe sprinkler systems are loaded with water, and when a fire occurs, the sprinkler head activates immediately and distributes water straight onto the fire. Each sprinkler head is individually actuated and delivers water when it detects heat.

This system is suitable for climate-controlled buildings. If you are unable to keep a temperature over 40 degrees Fahrenheit, you may be denied permission to install fire sprinklers. You must protect the wet pipe system from freezing by using heat trace and insulation. To respond to heat quickly, you may need to calibrate the thermal working element with a sprinkler. You should engage a professional for fire sprinkler installation to ensure that your commercial building has a functional system.

2. Dry Pipe System-

These systems are typically implemented in buildings in low-temperature settings, where your pipe system may freeze due to the low temperature. Water is not contained in dry pipe sprinklers. Instead, air or nitrogen is present in the pipe system. If the system detects a fire, the sprinkler's thermal operational element activates, releasing nitrogen. Following this, the system's pressure begins to fall to a particular level, allowing the system to release the water and shower on the flames.

These air-filled fire sprinkler systems are more prone to internal damage and need extra design consideration than wet pipe systems. This system also requires proper pitch of system piping and additional components such as a dry pipe valve, pressure monitoring, and air compressor. If you have set up your business in extreme cold, there will always be the risk of pipes bursting. That's why a dry pipe system is ideal for your business.

3. Deluge Pipe System-

Deluge fire sprinkler installation is typically for the protection of high-challenge fire risk, so these systems are best suited for a commercial building. These fire sprinkler heads are always open and do not have a heat sensor. You need to initiate the activation from a fire detection or manually. In the case of rapid spreading fire, this pipe system is considered too slow due to its activation time. However, these are perfect for protecting fuels such as flammable liquids and gases.

Normally the lack of water in the deluge system helps you get permission to install them in warm and cold environments.

4. Pre-action system-

Pre-action systems are similar to the dry pipe system. However, they are only activated by a two-step process, first, the pressure allows the water to fill the pipes, and second, the individual sprinkler head is activated. This system can shut down automatically in the case of a false alarm; that's why this pre-action system is suitable for a commercial setting.

The bottom line!

Fire sprinklers are automatic and well-designed systems that rapidly control fire and reduce property damage. After fire sprinkler installation, you will be glad by their low maintenance quality. You are just required to schedule inspections on an annual basis to investigate their functionality, so the sprinkler system provides you with a long service life of up to 20 years without any major repair.

If you plan to install an efficient and durable fire sprinkler in your commercial building, contact the most reliable company, FireServ, right away! Their team is dedicated to offering top-notch and cost-effective fire safety systems for residential and commercial buildings.

Dial 800-567-5740 and request a quote today!