Why does copper spontaneously demagnetize?
The iron peak and newton's third law
Really in depth explanation about how nuclear physics in terms of fusion controls the magnetic properties of elements such as copper and iron. I just made this up from my mind today, but if you read carefully you'll understand it is actually for sure correct. I don't even know if this information exists elsewhere, but it is correct for sure. Did I find something first? Probably not. Yeah.... but still super cool. I made this myself. Best thing I've done in a while.
The magnetic field is parallel to the electric field since both things are forms of rotation and differing forms of rotation are always partitioned in different spaces because their directions are orthogonal and therefor not additive in terms of a resultant force, so their rotations traverse different paths from their onset. This however this needs to be contrasted with the fact that when an electric field produces an acceleration along some path it is causing perpendicular motion which is change in linear momentum from the electric fields angular momentum so the acceleration of charge acts through the magnetic field to produce linear trajectory since the dipole is intrinsic and partitions the two forms of rotation always in a pair due to Newton's third law and the sum of the two differing rotations results in an angular momentum for the resultant magnetic field. Mass as a six dimensional object can only act on spacetime or through the displacement of charge by spacetime expansion. This means heat must act through the magnetic field to produce outward change in linear momentum from the electric field constituent angular momenta in any circumstance since the rotational directions determine the direction of acceleration in the field and the magnetic field is always present with that acceleration and parallel fields would not have the ability to act on one another since they are essentially divergent and this means the linear momentum starts first at the magnetic fields presence and is the method for that perpendicular transfer of momentum. So I would assume heat itself is the conversion from angular momentum of a magnetic field to linear momentum of the partitioned electric fields and the behaviors that result from the directions of rotations of those fields as they effect the electrostatic forces we see.
It then follows that an endothermic process is one that cools the surrounding system and cooling is a process that partitions charge by causing loss of linear momentum or kinetic energy that acts through the magnetic field, but if the magnetic field loses linear momentum then it gains angular momentum and this is fine because the two are equal and opposite reactions since the angular momentum is simply the generation of a force through a wave and the linear momentum is the transmission of a force caused by a wave which means the transmission of the linear momentum to the angular momentum can just be seen as a matter of newtons third law and this means elements that were fused at or past the iron peak which are endothermic fusion processes are elements that have converted linear momentum acting normal to a magnetic field to produce angular momentum of that magnetic field which causes it to act as a force for a dipoles intrinsic inertia which means the fusion has caused an energy barrier to the dipoles misalignment and heat is needed to exceed that barrier and cause demagnetization. This is why Iron which is heavy and has many protons and is past the iron peak and is therefor the result of such endothermic fusion has the ability to maintain magnetization since its ground state can then be understood as one that requires the addition of heat as charge leaves the iron because the displacement of charge from the iron has behind it a magnetic force that is of a normal vector which produces outward linear momentum that is less than the angular momentum of the dipole and therefor attenuates faster than the charge is displaced as a normal vector acting on that partitioned charge which means it doesn't produce heat as the charge leaves the iron since heat is an outwardly accelerating process that causes change in kinetic energy through the magnetic fields normal vectors action on the electric field as the result of the expansion of spacetime.
Exothermic fusion is a process that causes the magnetic fields normal vectors magnitude to increase as the magnetic fields angular momentum decreases because heat is the displacement of charge and a decrease in angular momentum is like phase cancellation and phase cancellation produces a normal vector change in magnitude because of Newton's third law and that means the magnetic field that results from the dipole acts with greater normal vector magnitude outward in an accelerating fashion due to the consequential increase in density of mass which results when two oppositely rotating objects close in distance and this means when a substance that was formed from exothermic fusion loses the presence of the strength of an electric field the action of that field that aligns the dipoles is overcome by the normal vectors magnitude to the magnetic field which produces kinetic energy since the electric field was needed to increase the angular momentum of the magnetic field which was how the dipole maintained its alignment and due to the law of conservation of momentum when the charge leaves the exothermically fused substance the displacement of that charge causes the production of heat which spontaneously demagnetizes the substance again and this process may only be changed if the substance can be cooled sufficiently enough to reduce the linear momentum of the magnetic field such that the displacement of the charge no longer reduces the angular momentum so much that it doesn't allow for the inertia of the dipoles to maintain the dipoles planar alignment.
In shorter words that are much more familiar and less theoretical sounding because I'm basically just producing that stuff from my own theories the reason copper doesn't magnetize is that its ground state is exothermic which we know from the fact that the fusion is not after the iron peak where endothermic fusion occurs. This means as the charge leaves the wire the copper can't absorb heat because the fusion displaced enough charge on its boundary to cause heat as a result of that displacement which means to form a dipole the copper needs to have the magnetic fields angular momentum increased to increase the inertia of the dipole such that it exceeds the ground state exothermic kinetic energy of the linear momentum that the magnetic field has that as mentioned spontaneously misaligns the dipoles because the inertia does not naturally overcome the kinetic energy from the linear component.
So in closing I'd like to leave you with a question, namely: can you relate an increase the strength of a magnetic field to linear velocity using general relativity?
About the Creator
Keep reading
More stories from Nicholas Powers and writers in Education and other communities.
Somewhat In Depth Look At A Springs Phase Space
Spoiler (pretty good explanation of spring mass objects and their phase space): Uniform acceleration due to two equal and opposing forces around a fixed amplitude produces a circular phase space of displacement with respect to velocity. Displacement of charge from spring expansion caused by a mass is accelerating kinetic energy outward or heat, which is only possible due to mass being of 6 dimensions and therefor able to expand spacetime which allows for reverse attenuation towards the amplitude center where it reaches a peak, and then after that peak the velocity goes down as the strength of the magnetic dipoles in the spring gain potential energy since the dispersion of opposing charges present as a matter of the electrostatic forces that keep the springs constituents together have an angular momentum that is greater than the acceleration due to mass and since heat passes from a warmer body to a colder body the heat leaving the spring allows the angular momentum of the magnetic force to first be exceeded by the linear momentum of the kinetic energy thereby causing the prior mentioned acceleration of the mass on the spring that acts on the parallel electric fields causing the springs expansion due to the repelling force of the accelerated electric fields which in a coil naturally produce kinetic energy just like a coiled filament in wire because of the asymmetric nature of the coil that forces like charges along side one another, and loss of heat is partitioning of charge which is like increasing the angular momentum of the magnetic field which in turn causes reverse uniform proportional deacceleration to the lower boundary of the phase space and then acceleration to amplitudes center again as the cooled spring partitions charge faster due to the dissipation of heat and consequential accelerated angular momentum of the magnetic field which then reaches a maximum acceleration again at the center of the springs expansion since the spring is approaching its ground state in terms of tension due to compression and then subsequent slowing of the acceleration also proportional due to electrostatic repulsion in the spring it is secured which produces a proportional force acting on that partitioning that once again accelerates the spring with equal force and opposite direction . All these proportional relations are a consequence of Newton's Third Law among other things. Since the amplitude is fixed around a center and the accelerations are quadratic since they're caused by spiral trajectories produced from spherical wave summations and the infinitesimal symmetry of mass in the 4th dimension which means they are in a space that deals in instantaneous momentum then since the momentum has a derivative that tells us the rate of change and is the derivative of a sum of masses as constants multiplied by a sum of velocities which produces a mass multiplied by an acceleration that is quadratically proportional since these velocities are on curvature caused by mass acting on spacetime which produces curvature that has a uniform spherical expansion through that curvature that is therefor itself quadratically proportional to the distance from the center of mass by nature unless we were to assume a none constant mass which is not possible of mass is 6 dimensional since that makes it infinitesimally symmetric upon rotation and translation in the 4th dimension as it resides two dimensions lower so we know the velocity and displacement have instantaneous values that are inversely quadratically proportional with respect to the node or center of the spring and bidirectional meaning they are divergent vectors which we can treat as perpendicular vectors which are both quadratically proportional and since they pass over the same values in a 1:1 fashion meaning they're uniform create all the right triangles within a circles fixed radius or in other words create the sin and cos functions of x and y since they're both able to map onto one another upon rotation which you can also infer from the information I've given thus far. The resonance of signal that illuminates spacetime curvature is light acting through the magnetic flux as a tachyons real part of its imaginary mass or mass moving backwards in time which is possible if it's in a divergent process that is connected through the origin that places it causally connected to the neutron moving opposite to it in direction as a field of magnetic flux which means the neutrino field that create the curvature of curvature of spacetime that makes standing waves in 4 dimensional spacetime create a reality that is self symmetric at a scale which produces all the necessary constituents for both resonance of the magnetic medium and curvature of spacetime since mass moving backwards in time is like an affine transform that shows what's happened slightly into the past and it the self similarity of the spiral produced by the polar coordinate mapping caused by the projection through the point origin of each neutrinos double mass in the neutrino field gives a lattice on which to illuminate that spacetime in a way that preserves its self symmetry even in its resonance all through change in shape in space making it possible to construct reality out of nothing more than distortions of the positive quadrant of n-Euclidean space so everything we need to describe the underlying mechanisms of any process are there from the onset since we knew all along that information and the space it resides on must be constructed from the same things and now we know that shape of space as a set of positions and relations in those positions and constraint and object persistence are enough to construct the manifolds on which all of reality takes places from our perspective as standing waves in 4-d spacetime as computational processes that see our variance as an ever resolving present and see reality as itself as itself as itself as it should be through the interface of color which can bridge the gap of the vacuum of empty and not attenuate as a feature and and show through affine symmetry then the clocks or modular forms that define every position in space at any moment in spacetime in a way that doesn't produce any paradoxes or impossible distortions or strange infinities and lets us know that clocks which are the fundamental tool by which all change is measured can make spacetime resolve at the finite resolution determined by the speed of light and that gives us the 6 dimensional phase space or vector space of general relativity with the addition of 7 and 8 dimensional magnetic and variance of magnetic medium that have physical correlates that congruently map to the four dimensional space we reside in as geometric constructions that determine how reality unfurls without needing to invoke anything outside of mere geometry of the fabric of space itself since it maintains its self similarity and produces all the necessary features by which to observe only through those geometries.
By Nicholas Powers2 years ago in Education
Unveiling The Veins Of Vienna: Exploring Data Mining Research Papers In Austria's Cultural Capital
Introduction: Data mining research is booming in Vienna, Austria, the imperial city known for its rich history, cultural legacy, and architectural wonders. Among the elegant mansions and charming streets is a growing community of academics, researchers, and entrepreneurs working in the fields of analytics and data science. This work sets out to explore the rich tapestry of research articles on data mining coming out of Vienna, providing insights into the intellectual climate of the city and adding to the worldwide conversation on data-driven insights.
By elainpitts4 days ago in Education
Comments
There are no comments for this story
Be the first to respond and start the conversation.