11 Safety Tips for Using Power Wash Cleaner

As we all know unsafe acts will keep us in danger and losses, safety measures are always essential for Power Wash Cleaning methods. The idea of power wash cleaning will raise your assets' curb appeal with a little effort and time, but a high-pressure nozzle can cause cuts, bruises, or even more harsh injuries if not used properly. For the sake of users' convenience, this blog will entail some significant safety tips for using Power Wash Cleaner in Brantford.

Why people should follow safety tips for power wash?

Power washing has been a cleaning method where the use of steam or pressurized water produces a enormous force. This force removes stains, spots, unwanted paints or coatings. People should always be aware of the safety issues concerned with the power wash cleaning. The reason is that, pressure washing nozzles and their water force can cause serious injury to life and assets.

As seen through the many practical cases, the jet spray of power washing can cause serious skin lacerations, bruises, pores or punctures. It can also cause dangerous eye damage that could lead to even blindness.

The most significant safety tips for Power Wash Cleaning

On the contrary, there are more benefits of Power Wash Cleaner. To take advantage of those benefits, people just need to follow some safety guidelines regarding the matter. Mentioned below are some power washing safety tips for you.

1. Go through the Owner’s Manual

Before operating the power washing equipment, become familiar with the washer machine and accessories. Through the company owner’s manual booklet, you can learn how your power washer will work, and how to control the nozzle. Also, you will know what special safety features there are. After knowing all these, you should turn on the machine.

2. Check Safety Features

All pressure washers generally come with built-in safety features. They should routinely be checked to ensure they are working appropriately. Most of these features are too much critical. They are needed to prevent the temperature and water pressure from reaching dangerous levels that might cause serious injury.

3. Control with the Correct Pressure

This is the most important safety tip so far. Use the correct pressure for the surface you need to clean. A 3000 psi pressure rating is always recommended for the concrete surface. For softwoods, you need to use a 500 psi pressure rating. Conversely, you need to use around 1,200 psi pressure for the hardwood surface.

4. Use the proper tools and accessories

You should always use an accurate hose diameter, durable cables, flow rate, and nozzle aperture. It should be as per your owner’s manual recommendations. Stay away from using fancy or fake products. Doing so can cause washer malfunction, poor outcomes or even it can cause serious accidents during work.

5. Take eye protection with proper clothing

Your body and health are always valuable and the cleaning should always be done with appropriate safety clothing. Wearing heavy-duty pants and full-sleeve shirts is better for Power washing. Remember- eye-protecting goggles are always necessary.

6. Always maintain a safe distance

While spraying, it’s suggested that you do spraying while standing at a safe distance from the surface. You need to make certain that the spray does not hit the surface from the very close position. The reflected water force can have a huge bouncing back effect and that can hurt you very much.

7. You need to stay grounded

A pressure washer should be operated only if you are safely standing on the ground. Without a good posture or stance, applying a power wash can be detrimental. Suppose you are on a roof or you are standing on a ladder, and then stop using a power washer.

8. Use the Right Cleaning Chemicals

The owner’s manual generally gives a list of approved detergents to use with the power washer cleaner. You should not use harsh type of chemicals anymore. Also, match the correct detergent with the surface you are cleaning. Be alert if you are spraying a roof since the forceful pressure can easily harm the shingles.

9. Avoid Electrical Hazards

In a time of pressure washing, you should avoid all electrical hazards. These could be power lines, circuit boxes, telephone junction boxes, and other outdoor fixtures that might be conducting electric power.

10. Avoid Gas pipelines and supply units

You need to use more precautions when you are about to use the power wash. You need to stay clear of easily inflammable objects like paint thinners. Before and after the power wash, you need to neatly check for any gas leaks or gas emissions.

11. Identify what to wash and what to avoid

Not every surface should be power washed safely. Try to avoid some surfaces like laminar sandstone surfaces which are too soft to endure the havoc of water power. Avoid anything painted newly. Power washing can take the particles off of an asphalt roof also. In a nutshell, you need to understand which objects can be washed safely and which cannot.

The Conclusion

Instead of using a Do-It-Yourself approach, it is always best to work with some professional service providers. They have ample knowledge, experience and tool preparation for conducting a comprehensive power wash for your cleaning purposes. To give you a good professional service solution in this regard, we have a good name Keen 2 Klean. Contact them soon and also try for Gutter cleaning in Brantford.