Solar Swimming Pool Covers

Tired of paying excessive bills for swimming pool heating equipments? Why, don’t you buy solar swimming pool covers? Swimming pool covers are a cheap and practical way to prevent heat loss from the swimming pool.

Swimming pool covers are giant sheets resembling a bubble floating on the surface of the swimming pool. It traps the heat from the sun, transmits it in the pool, and keep the temperature of the water warm.

Solar covers are essential swimming pool equipments, especially in winter. During the chilly season, the water becomes cold quickly.

As a result, you need to continue heating and energy costs become high. At the same time, too much heating cause evaporation. You need more water to fill up the basin.

Swimming pool covers traps the heat of the water and makes it stay warm. At the same time, these solar covers in a way assist the heating of the pool water.

Solar covers can be used almost in every type of swimming pool. You do not require any anchor or others to tie them up with. You just need to make them float freely over the swimming pool.

However, if you are thinking that moving a wet blanket from the surface of the pool is not child’s play? You are right, yes it is cumbersome.

Most swimming pool covers available in the market come with a reel. The reel is helpful in wheeling out the cover from the pool. It makes the process easy and fast.

Lastly, maintaining a swimming pool is a hard task. It is not possible to keep away debris, dirt, bird droppings, and others out of the pool.

A solar cover keeps away from all of these. Just remove the cover before swimming and you get a clean and ready pool to dive.

Using Solar Swimming Pool Covers

You can heat your pool in an extremely cost-effective way during summer through solar swimming pool covers. The covers look like a blue blanket over your pool.

They help to keep pools clean as less amount of debris gets into the water. Moreover, these covers also prevent the evaporation of water from the pools.

Now let’s consider the steps to use covers for your pools.

1. Purchasing the right size of the cover

First of all, you need to purchase the right size of solar cover for your pool. If required you also have to trim some portions of the cover in order to fit it properly to the pool. Simultaneously you should also buy an automatic solar cover reel.

2. Placing a cover on a big roll

After buying the cover, you have to place it on the big roll at the back end of your pool. You have to install the pool cover roll on the reel and unroll the cover over water.

3. Heating up pool with sunlight

You need to heat up the cover of the pool with sunlight and so you have to leave the cover on the pool for the first few days. It helps to heat up the pool in a fast way.

4. Rolling up pool cover

Whenever you are using a swimming pool, you have to simply make use of the handle on the roll for rolling up the pool cover. At times you may also require pulling it on with free hands for keeping it aligned. However, if the roll-up process becomes difficult, you can buy an automatic cover roll for the swimming pool.

5. Never allow somebody to jump into the pool

You should not allow anybody to jump into your pool when the solar cover is lying on. This may lead to tearing up the cover.

Moreover, if the solar cover is tattered, it won’t be effective for your pool anymore and has to be replaced.

Take care of your swimming pool covers and know their right usages to enhance the durability of your pools.

Below Water Mount Installation of Swimming Pool Covers

Slatted covers offer both quality as well as beautiful design. You can get hold of various options for installing these covers that range from top mount to pit mount.

Each and every method of installation offers the most aesthetically pleasing design along with safety, energy-saving, and practicality.

The top mount installation can be fitted on both existing as well as new pools as the roller gets fitted on the side of the pool or deck.

On the other hand, pit mount or the below water installation are required to be built into the floor of the pool underwater.

Let’s check out the various below mount installation options as given below:

• Below water mount installation - It is an aesthetically pleasing solution as the roller is hidden under the water either in the pit at the pool end or in a niche in the wall or even on the floor of the pool.

• Water mount in niche - Here the slats roll in a niche at the back of the pool and on the top of the recess, you will find a wooden or plastic platform.

• Water Mount in Stair - In this method of installation, you will find the roller mounted in a recess which is covered by a platform lying below the surface of the water.

• Water Mount in Bottom - In this process, you will find that the cover is mounted below the floor in a special compartment and the roller is covered with the help of a panel.

• Water Mount in Floor - This type is ideal for overflow pools.

• Water Motor Options - As soon as you have decided where you exactly want to place the roller, you have to think about positioning the roller motor. You can either go for a separate pit or can also have an in-roller motor designed to be placed inside the tube of the roller itself.

Weigh up all the options and select the best installation method of swimming pool covers for your indoor space.

Read More: Gardening - Helpful Tips, Tools and Accessories, Decor, and Plant Selection