Smart Ways to Find a Permanent Solution to Poor Signal for Rural Areas and Farms

Have you ever tried to catch your favorite television show, but the signal just won't let you? Or have you ever made a call but somewhere along, your phone disconnects? Well, if you have, then you know how frustrating that can be.

Although it may not seem like it, poor signal reception is a more common problem than the world would want to admit. And the problem is even much worse in the rural and farm areas.

So why are the signals weaker in some areas more than others? There are several reasons why but these are the two main ones,

● Distance from the transmitter- the further you are, the weaker the signal

● Obstructions- these include mountains, tall buildings, trees, competing signals, and anything else standing between you and the transmitter.

These explain why rural areas and farms are the most affected by weak signals more than any other place. Luckily, this is not a permanent problem.

In this article, you will discover the smartest ways to find a permanent solution to poor signal reception for rural areas and farms.

1. Invest in a Booster

If you are experiencing poor signal reception, buying a booster is the first thing that should come into your mind. As the name suggests, boosters will boost the signal strength whether -it's for your cell or TV. But in each case, you will need to use the right one to get the desired results. You will need a mobile signal booster or a repeater to boost your cell signal and a TV amplifier or antenna booster for your TV signal.

There are several different types of boosters available in the market. But not all of them will work in your case. Take your time to find the perfect match to maximize your benefits. If you have any doubts, consider asking Sunshine Coast TV antennas for professional assistance.

Apart from that, make sure you install your booster in the right way before using it. Poor installation will only worsen the situation or create a whole new problem altogether. Again, if you have any doubts, seek professional help.

2. Install Your Antenna Outside

In general, antennas are installed outside on the rooftop or chimney. There is a good reason for that. To get a strong reception, the area between your transmitting tower and your receiver must remain clear of any obstructions to prevent interference. Installing your antenna on the rooftop is one of the most effective ways to avoid any possible blockages standing in your way.

3. Install Your Antenna Higher above Your Roof

If you are still experiencing weak signals even after installing your antenna on your rooftop or chimney, your obstructions may be much taller than you thought. In that case, you might want to raise your antenna even higher to avoid signal interference. The higher your antenna, the better the signal you get.

Remember, raised antennas are subject to strong winds and a harsh climate. Ensure that your fixing can support the weight and withstand these conditions to prevent your antenna from falling.

4. Use Two Antennas

If your signals are coming from multiple towers, your single- directional antenna might not be enough to pick them all up. In that case, you will need to buy another antenna to cover the signal in all directions. Ensure a safe distance between the two antennas to avoid any additional issues. And if you are having any trouble with the configurations, consider hiring a professional installer.

5. Substitute Your Splitters with Distribution Amplifiers

If you are using splitters to run multiple Televisions from one antenna, you might want to consider using distribution amplifiers instead. Remember, each time you split your TV signal, you lose more signal. That could be the reason your reception is weak. The problem is much worse if you live in rural areas or run more than 4 TVs. By replacing your splitter with a distribution amplifier, you will regain the signal lost from splitting, and that's not all. You will also have a 10dB gain from the amplifier to help prevent signal losses from the cable.

To understand the importance of using distribution amplifiers below is a breakdown of the signal you stand to lose from splitting

2 way splitter= 4dB signal loss

3 way splitter= 6dB signal loss

4 way splitter= 8dB signal loss

6 way splitter= 10dB signal loss

8 way splitter= 12dB signal loss

Conclusion

Just because you live in rural areas or like to farm does not mean that you cannot enjoy watching your favorite show due to poor signal. Use the tips mentioned above to find a permanent solution to your problem.

If that doesn't work, it means that the problem is much bigger than just signal strength. In that case, you might need to hire an expert to advise you on the best way forward.