How to Fix Vtech Baby Monitor Problems - The Most Common Errors and How to Fix Them!

Is your Vtech baby monitor recording the same thing for more than 15 minutes? Are the audio/video feed coming in out of focus or with motion? Do you get warning messages each time you turn the device on? Have you tried unplugging it for a few hours and then plugging it back in and the same thing happens? If you answered “yes” to any of these questions, then your Vtech baby monitor might be having problems.

Vtech baby monitors use digital video and audio signals to send visual and audio signals to your cell phone or other devices.

If the signals can’t go through a wall or your router, they will get delayed, which can cause problems with the picture and audio.

If your Vtech baby monitor is less than a year old, it is probably protected under Vtech’s 1-year warranty. If it’s more than a year old and you aren’t assured of its performance, you should consider buying a new one.

To see if your Vtech baby monitor needs service, check out our How to Troubleshoot a Broken Baby Monitor article.

You can also see our comprehensive list of Vtech Baby Monitor Error Codes and try to correct any problems you may be experiencing with your monitor.

What is the Problem and What can Cause a Vtech Baby Monitor to Interfere?

The most common reason why a Vtech baby monitor doesn’t turn on is a defect in the power lead.

This issue can be fixed by replacing the power lead, but it’s not something you need to worry about if your baby monitor is less than a year old.

If your Vtech baby monitor is more than a year old and you are still having problems, it is probably due to a defect in the monitor itself.

This is a costly item, so if your monitor is more than a year old and you are thinking about replacement, there are many excellent baby monitor alternatives that cost much less and do not require a special replacement monitor lead.

If you are unsure about the quality of any baby monitors available, the easiest and most cost-effective thing to do is to purchase a model that is at least a year old.

Your baby monitor is one of the most important devices in your house, so it should be perfect! If you notice any problems with it, problems during pregnancy, or problems after the baby is born, your baby will most likely notice it.

The Functioning of a Vtech Baby Monitor

When your baby is born, you will most likely notice that they are out of sync with the rest of the world around them.

This usually happens because your baby’s brain has not developed enough to process the amount of information being emitted from their ears, eyes, and mouth at the same time.

To help your baby make sense of their environment, you will need to connect them to a monitor.

A camera can be used to take photos and an infrared sensor can be used to detect movement.

Most baby monitors also feature a “geo” feature, which allows you to see the actual location of your baby from the monitor.

This feature is highly accurate, and is often Southern Hemisphere or Northern Hemisphere dependent.

Video/Audio Troubleshooting for a Vtech Baby Monitor

If your Vtech baby monitor is reporting issues, there are a few things you can try first.

Check the power cord. A power supply cord is like an extension cord, so make sure it is connected properly.

If it is not, the power from the monitor will go to the cord that is connected to the power supply and not to the device itself.

Check the picture quality. Your monitor should be able to display a “normal” picture. If the picture is grainy or extremely low resolution, the monitor may not be able to display all of the information that is being sent to it.

Check your signal. Make sure you are having a good connection: phone, computer, etc. It could be choppy or broken if you are having a difficult time receiving phone signals.

Updating Your Vtech Baby Monitor

After correcting any issues you may be experiencing with your Vtech baby monitor, you will want to update it’s firmware.

You can do this by removing the monitor from the box and removing the batterie from the device.

Then, connect the monitor to a computer or a laptop and copy the contents of the /firmware folder from the monitor’s sd card into a file on your computer.

If you are updating a non-Vtech monitor, be sure to purchase a monitor case or cover to protect your monitor from dust and other hazards.

Conclusion

If you are experiencing any problems with your Vtech baby monitor, it is likely that there is a problem with the device itself.

In this case, a replacement part should fix the problem. If the device is more than a year old, it is probably protected under Vtech’s 1-year warranty.

If it’s more than a year old and you aren’t assured of its performance, you should consider buying a new one.