How to Create Frosted Glass Effect for Your Home Windows

Frosted Privacy Window Film

Along with creating more energy-efficient home, many homeowners are also looking for a simple way to create frosted glass for their home windows. The traditional way of creating a frosted glass window would involve sand-blasting a glass, which is also subject to the suitability of the glass. The hassle of totally taking down the glass and sending them to a glass factory, not to mention the security and protection issue associated with missing glass, is enough to put the ideas off for many homeowners. However, all this is about to change, especially to owners who had always preferred to improve their homes the DIY way.

When you visit any home development store, you will be able to find the vinyl window film that can be applied onto any clear glass. Conventionally, window tinting uses a thin sheet of plastic film and is stick to the glass surface using glue. Nowadays, window film is made of vinyl and is slightly thicker compared to the past. They are also made to adhere to glass surface through static action, and they do not require any form of adhesive at all. The introduction of this form of window frosting film is what makes home window tinting a breeze to many homeowners.

With this type of self-adhesive window film, owners could easily install glass film on their own, without the need to employ expensive builders. There is no mess and no dirt. The installation of window film over a typical dimension window takes approximately fifteen minutes. They can be installed with very simple tools that can be found in your home or bought from any hardware store. All you need is just a spray bottle filled with a soapy solution, a utility knife a squeegee, and you are ready to go with the installation. With vinyl window coatings, you can easily transform any clear glass into any effect that you want.

In general, many homeowners will just use a frosted window film that is opaque to increase privacy for a room. They are suitable to be installed on bathroom windows and shower door. The glass film will not come off even though it is subjected to high moisture and temperature. One good feature of the glass film is that even though it blocks off view, it does not block off sunlight that shines in. Thus, with the glass films installed, you do not need to turn on more lights than you should.

Another design of frosted glass film that many homeowners like is the etched glass effect window film. These usually come in many patterns. They could incorporate natural elements such as birds or leaves as part of the design or repeating geometrical patterns. If you have a glass door that opens out to a garden, those with natural elements design will be most fitting. Geometrical patterns are usually applied onto glass doors, side look-outs, or glass cabinet. Glass film that is self-adhesive may be applied onto any glass surface including your coffee table.

Besides decorative or privacy purposes, window films are frequently installed because they can filter out a harmful ray of the sun. Buy your glass films from the reliable merchandiser, and you can filter out up to 95% of the harmful ray of the sun. They make your home cooler and create a more comfortable environment for its occupants.

Glass films usually come with a three to five years of warranty. The product usually lasts twice as long as its warranty. When it comes to removal, the process is even simpler than the installation. All you would like to do is to simply peel off the window film. If they are still in good condition, you can simply re-use them on other windows. Many customers who have bought and installed the frosted window film is satisfied with the products.

More details about frosted glass and frosted glass alternatives. Click here.