A Step By Step Guide Roof Tile Replacement For Your Home

Are you thinking about replacing your roof tile? If yes, this article can be quite beneficial to you. This guide will give you detail information about the roof tile replacement process. As you know, different roofs have different replacement process, so you need to equip yourself with every single detail when going for roof tile replacement.

Tools needed for roof tile replacement

Following are some of the major tools that you will need to replace roof tiles:

● Hammer

● Ladder

● Pry bar

Safety equipment needed for roof tile replacement

When you are thinking about replacing the old roof tile, you need to give maximum attention to safety and security. To replace the broken tiles, one of the most important equipment that is needed is a good quality ladder. The ladder should be placed on a flat surface. If you haven't ever replaced roof tile before, you should ask someone to hold the ladder for you so that it remains steady and you can do the required task. Replacing roof tile is a hands-on job, and thus, it is important to follow certain safety protocols like wearing hand gloves and keeping the ladder steady on flat surface, etc. Hand gloves will help you prevent from any type of accident or injury to your hands.

Materials needed for roof tile replacement

Following are two main materials that you will need for roof tile replacement:

● New roof tiles

● Nails

Not much material is needed to install a new roof tile. Thus, be ready with this equipment.

Preparation for replacing a roof tile

To begin the process of replacing roof tile, you first need to get rid of the old and broken roof tiles. Removing the old roof tiles is quite a simple and straightforward process. All you need to do is to lift away overlapping tiles that may be holding the broken tile. If the tiles at your roof are nailed down, you may need a pry bar to lift up the overlapping pieces. Once you have removed all the old and broken roof tiles, you will see a gap in your roof where you can install new tiles.

How to install new roof tiles: step-by-step

Follow this simple and easy step-by-step approach to install new roof tiles easily.

Step 1

The first step for the installation of new roof tiles is to get rid of the old and broken tiles. This can be done by following the preparation step we mentioned above. If your roof tiles are nailed down, you need to use the pry bar before attempting to remove the old tiles.

Step 2

Once you have removed all old roof tiles, you will see gaps in the roofing area. Now you need to fill the gaps by installing the new tiles. Place the new tile on the gap where the old tile was installed initially.

Step 3

Once you have replaced the old tile with the new one, you need to secure it by replacing the overlapping tiles to the correct position. To do this, you need a hammer to lift up the overlapping tiles slightly, and then you can easily pull them back into the correct position. If you want to further secure the new tiles, then you can nail them into their place by using a hammer. So, follow these simple steps for roof tile replacement.

Roof tiles are made up of different types of material, so make sure to choose the best material, whatever your choice is. Some of the major types of roof tile include solar roof tiles, composite roof tiles, metal roof tiles, slate roof tiles, concrete roof tiles, and clay roof tiles. The choice for best roof tiles can depend upon different factors like your location, climatic condition of are where you are living, and the look and view you want for your home. So, choose what suits you best considering all these factors.