Education logo

Best Medical Coding Training

Learn ICD-10-CM Coding with Guidelines

By santosh gupthaPublished 2 years ago • 4 min read

General ICD-10-CM Coding Guidelines:

1. Locating a code in the ICD-10-CM

To select a code in the classification that corresponds to a diagnosis or reason for visit documented in a medical record, first locate the term in the Alphabetic Index and then verify the code in the Tabular List. Read and be guided by the instructional notations that appear in both the Alphabetic Index and the Tabular List.

It is essential to use both the Alphabetic Index and Tabular List when locating and assigning a code. The Alphabetic Index does not always provide the full code. Selection of the full code, including laterality and any applicable 7th character, can only be done in the Tabular List.

A dash (-) at the end of an Alphabetic Index entry indicates that additional characters are required. Even if a dash is not included in the Alphabetic Index entry, referring to the Tabular List is necessary to verify that no 7th character is required.

2. Level of Detail in Coding

Diagnosis codes are to be used and reported at their highest number of characters available.

ICD-10-CM diagnosis codes are composed of codes with 3, 4, 5, 6 or 7 characters. Codes with three characters are included in ICD-10-CM as the heading of a category of codes that may be further subdivided by using fourth and/or fifth characters and/or sixth characters, which provide greater detail.

A three-character code will be used only if not further subdivided. A code is invalid if it has not been coded to the full number of characters required for that code, including the 7th character, if applicable.

 First Character is always Capital Letter

 When you are coding, you must always use the code with the greatest possible level of detail.

Examples: Refer to these codes in Tabular

I10 is a valid 3-character code because there are no subcategories for I10

I11 is not a valid code because there are 4th character subcategories for I11

I25.1 is not a valid code because there are 5th character subcategories for I25.1

E10.31 is not a valid code because there are 6th character subcategories for E10.31

S00- is not a valid code because there are 7th character subcategories for S00

3. Code or codes from A00- Z00-Z99.8

The appropriate code or codes from A00.0-Z99.8 must be used to identify diagnoses, symptoms, conditions, problems, complaints or other reason(s) for the encounter/visit.

4. Signs and symptoms

Codes that describe symptoms and signs, as opposed to diagnoses, are acceptable for reporting purposes when a related definitive diagnosis has not been established (confirmed) by the provider. Chapter 18 of ICD-10-CM, Symptoms, Signs, and Abnormal Clinical and Laboratory Findings, Not Elsewhere Classified (codes R00.0 - R99) contains many, but not all, codes for symptoms.

*Sign or symptom NOT part of disease condition = report separately

When coding medical conditions, it is important to understand the guidelines regarding the reporting of signs and symptoms along with confirmed diagnoses. The general rule is that signs and symptoms should not be reported separately if they are integral to the confirmed diagnosis. In such cases, the focus should be on coding the definitive diagnosis rather than the individual signs or symptoms. However, there are exceptions to this rule, and coders should consider certain factors:

Integral Signs and Symptoms: If a sign or symptom is considered integral to the confirmed diagnosis, it should not be separately coded. For example, in the case of otitis media ( Middle ear infection) with ear pain, the ear pain is inherent to the condition and is not reported separately.

Separate Reporting: Symptoms may be reported with a confirmed diagnosis only when they are not typically associated with that specific diagnosis. It is essential to understand the pathophysiology of the condition or consult with the healthcare provider to determine if the signs or symptoms can be separately reported.

Routine Association: Signs and symptoms that are routinely associated with a specific disease process should not be assigned as additional codes unless instructed otherwise by the coding classification or guidelines.

Refer ICD-10-CM code N40.1 (Important code for medical coding exams)

N40.1 - Benign prostatic hyperplasia with lower urinary tract symptoms

Enlarged prostate with LUTS

Use additional code for associated symptoms, when specified:

• incomplete bladder emptying (R39.14)

• nocturia (R35.1)

• straining on urination (R39.16)

• urinary frequency (R35.0)

• urinary hesitancy (R39.11)

• urinary incontinence (N39.4-)

• urinary obstruction (N13.8)

• urinary retention (R33.8)

• urinary urgency (R39.15)

• weak urinary stream (R39.12)

Uncommon Signs and Symptoms: However, additional signs and symptoms that are not commonly associated with a particular disease process should be coded if they are present and documented in the medical record. For Best Medical Coding Training Visit Medesun Website

Example:

Question: Pneumonia and dehydration

 Code first J18.9, Pneumonia and

Code E86.0, Dehydration

 Not all patients with pneumonia have dehydration

 Dehydration was not stated to be due to pneumonia

"The devil is in the details" - highlighting the importance of paying attention to the specific details of a patient's medical condition and history to accurately code their diagnosis.

5. Conditions that are an integral part of a disease process

Signs and symptoms associated routinely with a disease process should not be assigned as additional codes unless otherwise instructed by the classification.

teacher

About the Creator

Enjoyed the story? Support the Creator.

Subscribe for free to receive all their stories in your feed.

Subscribe For Free

Reader insights

Comments

There are no comments for this story

Be the first to respond and start the conversation.

Sign in to comment
    Written by santosh guptha