01 logo

Setek Wifi Extender Setup| Setek wifi extender login|Setup setek wifi extender

How to set up setek wifi extender

By Smart Wifi PlusPublished 2 years ago 5 min read
Like
Set up setek wifi extender

SETEK technology provides an all-in-one solution to your network, speed, and streaming problems. The SE TEK wifi range extender improves the speed of your network by reducing dead zones in your home or office. The range extender additionally increases the coverage area of your network.

So that you can have constant internet access throughout your home or office.

SETEK WiFi Extender features-

Two types of SETEK wifi range extenders are available. SE TEK wifi range extender SE01 and SE TEK wifi range extender SE02 are the two models.

1. The first feature of the Superboost wifi repeater variant of the extender is that it supports up to 300Mbps network speed.

2. The second feature is that the wifi range extender is simple to set up with any brand of wifi router.

3. The third attribute of a range extender is that it supports IEEE 802.11n, IEEE 802.11g, and IEEE 802.3 standards.

4. Supports the fourth function of WPS-enabled devices.

5. The range extender’s final feature is two 10/100 Mbps auto-negotiation Ethernet connectors.

Various forms of operation

Wireless router mode, repeater mode, access point mode, client mode, wireless AP mode, and wireless bridge mode are all available on the SETEK wifi range extender.

Mode of operation: wireless

This SETEK mode establishes a private wireless network that allows the user to share data with various devices. Hotels and restaurants typically employ this mode of the range extender.

Repeater

This is the SETEK wifi range extender’s default mode. This mode is meant to raise or enhance signal strength as well as extend the network coverage area of your device. The repeater mode creates a large networking zone in your house or office, avoiding dead zones.

Wireless Access Point

The range extender creates a wireless network for the wifi device in this mode. The range extender transforms the device’s wired transmission into a wireless signal. You can use an ethernet cable to connect the wifi router/devices to the hotel/homeroom broadband interface in this manner.

You can also share your wireless network with other wifi devices, effectively creating a new wireless network area.

Client mode

This mode of the range extender allows wired-only devices to connect to a wireless network that already exists.

What is the procedure for setting up the SETEK wifi range extender?

• Setting up the SE TEK wifi range extender is straightforward, regardless of whether you’re an experienced extender user or a beginner. Three alternative configurations are available for the SE TEK range extender.

• The approaches for configuring the range extender, as well as the stages involved, are detailed in the following section.

To get started, go to this page on the website.

SETUP

Using the wifi wizard to set up your network (WPS button)

Using the WPS button to set up a SE TEK wifi range extender. It enables you to configure it without the use of a computer or a mobile device. You can configure the range extender without logging in to the browser’s settings page by using the WPS button configuration.

The following are the steps to set up the SE TEK wifi range extender using the WPS button:

  1. Plug the range extender into a power outlet near the wifi router or inside the router’s coverage zone.
  2. Press and hold the WPS button on the router’s back panel for five seconds. Hold the button for 1-2 seconds before releasing it.
  3. Within 50 seconds after pushing the WPS button on the router, press and hold the WPS button on the range extender.
  4. The range extender will be restarted. It will restart automatically and connect to the router or other device successfully.
  5. Note: If your current wifi SSID is WiFi, it will change to WiFi Plus after you connect to the range extender successfully.
  6. Place the range extender in a location where it can replicate network signals in a low-signal area without slowing down the connection.

Making use of a mobile device

The default login credentials for the SE TEK wifi range extender can be configured using a mobile device. This will be printed on the extender’s label, and the extender will be inboxed.

SETEK wifi range extender credentials are as follows:

  1. SETEK SE01 Default login IP address: 192.168.10.1
  2. SETEK SE02 Default login IP address: 192.168.1.254
  3. Default username – admin (Lowercase).
  4. Default password – admin (Lowercase).

The methods for utilizing a mobile device to set up a SETEK WiFi range extender are listed below

  1. To keep the se tek range extender online, plug it into a power outlet first.
  2. Now, turn on your cell phone. Then go to WiFi settings and look for the SSID of the range extender.
  3. After scanning the last time, you’ll see the SE TEK wifi range extender’s default SSID, which is SETEK.

When connecting to a wifi network, the range extender does not require a password.

  1. To begin, connect your mobile device to the network’s SSID.
  2. In the address bar of your mobile device’s browser, type 192.168.10.1.
  3. You will be redirected to a login page.
  4. Now, type in your credentials ( admin in both username and password).
  5. You’ll be able to see a list of all the neighboring wifi devices’ SSIDs. Choose the SETEK wifi SSID and set a password for it.

Using a Personal Computer (PC) or a Laptop

A computer or laptop can be used to set up the SE TEK wifi range extender. Using the same methods configuring a mobile device. A computer or laptop can connect to the range extender via a cable connection (port) or a wireless network (WiFi SSID).

The procedures for utilizing a computer or laptop to set up the SE TEK WiFi range extender are listed below.

• Plugin the SE TEK wifi range extender to a LAN port first for wired connection to computer or laptop.

Alternatively, from the laptop/computer, enter the default wifi SSID.

•On your desktop, open a web browser and type http://192.168.10.1 into the URL search box. Now go to the extender’s login page.

• Logging in for the first time, use admin the login and password.

•The extender looks for available networks. A list of available wireless SSID networks broadcasting near the extender will appear.

•Allow connection from SETEK by selecting your wireless device’s SSID and entering the valid existing password.

Note: The wireless device’s SSID will now display with a plus(+) name appended after successful configuration.

Read More...

how to
Like

About the Creator

Smart Wifi Plus

All opinions expressed on this website are those of the authors and do not represent the views of any other websites. Use our website to learn how to set up, operate, and fix your product.

Reader insights

Be the first to share your insights about this piece.

How does it work?

Add your insights

Comments

There are no comments for this story

Be the first to respond and start the conversation.

Sign in to comment

    Find us on social media

    Miscellaneous links

    • Explore
    • Contact
    • Privacy Policy
    • Terms of Use
    • Support

    © 2024 Creatd, Inc. All Rights Reserved.