How Change TP-Link Router As Default Factory Setting?

There are several reasons why you should reset your router or modem to factory settings. Some of these reasons are that you may find that the TP-Link router resets itself for no apparent reason. If your router does not have a reset button, you can reset it via its configuration web interface.

If you and your family constantly stream TV shows, movies, and video games, think about a new router. Everyone knows that everyone should reset their Internet router regularly for various reasons. You can press the power button regularly, wait a few minutes and then press it again to turn off the router. If you want to make a change to fix a problem, you should know how to perform a hard factory reset. The TP-Link AC1750 is one of the most popular Internet routers on the market, making it an excellent example of easy reset tutorials.

Reset TP-Link Router

When resetting a TP-Link Archer C2 router, the device receives a pre-defined password that the manufacturer knows is in the device box. Hackers know this and try to access your network with this password. If you want to log in to the router's user interface, you must use preset login credentials.

The default administrator name and password, which you can change to prevent attackers from taking over, is printed on the back of the router and can be found in google search using your model number. This interface allows you to change the settings stored in the router's non-volatile memory. You can record the adjustments you make to the factory settings by changing the router password, wireless SSID, name, and password. Blur the settings for username, password, SSID and the name of the wireless access point.

The default IP address, username and password can be found in the user interface of the Wireless Dual-Band Router TP-Link Archer C7 AC1750. Open the correct TP-Link server and in the "TP-Link Login" field the user name/password will appear. Open a web browser, enter the wireless router’s IP address into the address bar, and click Next.

If the above address does not work for you, you can visit the TP-Link login website or use the online tool to locate the router's IP address. Connect with the TP-Link Router to the browser, open the browser and enter the TP login IP in the address bar.

Go to the System Tools > Factory Settings page, click the Restore button and wait for the router to return to factory settings. If resetting the router fails, you do not need to hold down the reset button for too long and try again. A factory reset deletes all custom settings on your Tp link router and your WLAN name and password disappear.

This causes the light on the router to blink for many minutes until it calms down. Once the router is disconnected from the Internet, reset the router password so that it knows that it is turned off from the Internet by default and becomes a soft target. After reconnecting the router to the Internet, you can log in to the router, change the admin password of the router to default, and make other changes such as the wireless SSID, name, and password settings.

For most products such as wired routers, wireless routers, ADSL2 + modems, and routers such as TD-8616 TL MR3420 v1, TL MR3220v1, and TL MR3040, press and hold the reset button on the back panel layout (pin) for 6-10 seconds while the device is running, release the button and wait for the device to restart.

There are a few configurations for NAT and other elements of your TP-Link router depending on the specific settings for which the service provider you are using. You can perform all the above steps to configure the router as you wish. Make sure that you restart the router on the computer after you have set it up by following the above suggestions.

Update Firmware After Reset

In order for the firmware update to take effect, you must restart your router. Your new fast and modern internet connection won't feel any different after the update, but your router may be to blame. Your router may not be able to support the many devices in your home, or it may have reached its capacity.

Reset TPLink Router By WPS Button

The plugin at the other end of the router is located at the back of the router. You can press and hold the reset button on the router itself. In this model, we see the WPS reset button on the back instead of the front panel.

Press the WPS Reset button on the back or front panel for less than 5 seconds with the WPS function and the WPS LED will flash to reset the router after 10 seconds. Press and hold the button for more than 10 seconds and you will notice that the sys LED flashes fast and flashes slowly. Release the button and wait until the router is restarted to its factory settings.