Fix WiFi Doesn’t Have A Valid IP Configuration Error on Windows 10

Most of the Windows users choose WiFi network over the wired network connection as here you don't have to deal with the wires.

Mostly WiFi network is a great choice but sometimes it also disappoints the users and WiFi doesn’t have a valid IP configuration error is one such case.

It is one of those errors that annoy Windows users like hell because it doesn't allow you to connect to the network. This is a WiFi network problem that triggers when WiFi failed to detect the IP address or configuration on your Windows computer.

But, like any other errors and issues, this error is also fixable. Now you must be looking for the solutions. So, here are some of the best potential solutions that will fix this error in just a few clicks.

Before moving to the fixes, first, take a quick look at the reasons that are responsible for this issue on the Windows computer.

What Causes WiFi Doesn’t Have a Valid IP Configuration Error Message

• Incorrect network configuration
• Outdated network adapter
• Faulty network driver
• Disabled Windows network services
• Issues with the TCP/IP stack
• 3rd party antivirus tool conflicting with the WiFi

Solutions to Fix WiFi doesn't have a valid IP configuration error

1: Renew IP Address

The first and the easiest way to fix the WiFi doesn't have a valid IP configuration error on Windows computer is to release and then renew the IP address.

If there is any network problem on your computer, then doing this will help you fix the error. Follow the steps given below to perform this solution:

• 1. Press the Windows + X keys and select the Command Prompt from the Quick Access menu.
• In the Command Prompt window, type these commands and press the Enter key after each command:

ipconfig /release

ipconfig /renew

• Close the Command Prompt and restart your computer.

Now check if renewing the IP address helped to remove the WiFi doesn't have a valid IP configuration error.

2: Update Network Adapter Driver

Outdated device drivers often cause several issues on the computer. So, probably your outdated network adapter driver is the reason which is causing the Wi-Fi doesn't have a valid IP configuration error on your computer. If this so, then update the driver and fix this error out.

• First, right-click on the Windows Start icon and select Device Manager.
• Click on the Network Adapters to expand the section.
• Right-click on your network adapter and select the Update driver option.

• Next, select the Search automatically for updated driver software.
• Now, Windows will search for the new updates and will install it automatically.

3: Uninstall the Wireless Adapter Driver

WiFi doesn't have a valid IP configuration error can appear on the system if you are using the faulty network adapter driver. So, if this is the case with you, then with a simple tweak you can resolve this issue on your computer.

For this, all you need to do is uninstall the wireless adapter driver and then allow Windows to reinstall it on the computer. Here are the steps you need to follow to do so:

• Type Device Manager in the Windows Search box.
• Select the Device Manager from the search result.
• In the Device Manager window, click on the Network adapters.
• Right-click on your wireless device name and select the Uninstall device option from the context menu.

• On the next prompted window, select the Delete driver software for this device and then click on the OK button.
• Restart your PC.

After restarting of computer, Windows will check for the new driver and will install it on your PC automatically.

4: Reset TCP/IP

Another solution that is expected to fix the Wi-Fi doesn't have a valid IP configuration error on Windows 10 is resetting the TCP/IP. To do this, you must follow these instructions:

• Click on the Windows Search box and type cmd.
• Right-click on the Command Prompt and select Run as administrator.
• Type these commands in the Command Prompt and don't forget to press the Enter key after each command:

netsh winsock reset

netsh int ip reset

• Exit from Command Prompt and restart your computer.

5: Set IP Address Manually

Whenever you connect to the home network or wifi you automatically assign an IP address and if there is any issue with the IP configuration, DHCP will fail to detect the IP address.

In this case, you will end up with this error message where your network will fail to detect your IP configuration. However, you can fix this error by setting the IP address manually on your system.

• Open the Control Panel and click on the Network and Sharing Center.
• Click on the Change adapter settings option given in the left pane of the Control Panel window.

• Right-click on your WiFi connection and select Properties.

• Check the Internet Protocol Version 4 (TCP/IPv4) checkbox.

• Click on the Properties button.
• Select the Use the following IP address.\
• Now, set the following values:

IP address: 192.168,1.14

Subnet mask: 255.255.255.0

IP gateway: 192.168.1.1

• Next, set these values under the Use the following DNS server addresses section:

Preferred DNS server: 208.67.222.222

Alternate DNS server: 208.67.220.220

• Click on the OK button.

6: Ensure DHCP is Enabled

We all know how important DHCP is as it is responsible for providing the IP address to the device connected to the network. So, if the DHCP is disabled on the computer, it won't assign you any IP address and WiFi will fail to detect the IP address.

Hence, make sure the DHCP is enabled. For this, you need to do the following:

• Press Windows + X keys and select Control Panel.
• Click on the Network Connections > Change adapter options.
• Go to your network adapter and right-click on it, then select the Diagnose option.

• Now, wait for the scanning process to get completed.
• If you found the DHCP disabled, then enable it.

7: Perform Clean Boot on Computer

If none of the above-given solutions fixed the error, then you must perform the clean boot. Doing this will disable all the 3rd party apps and services that are conflicting with your WiFi.

Follow these given steps to perform the Clean Boot:

• Press Windows + R keys together to open the Run dialog box.
• In the Run window, type msconfig and press the Enter key.
• On the Windows Configuration window, select Selective startup > uncheck Load startup items checkbox.
• Switch to the Services tab and here tick the Hide all Microsoft services box.
• Click on the Disable all button.
• Click on the Startup tab > Open Task Manager.
• Now, on the Task Manager window, right-click on each entry and select Disable.
• Once you have disabled all the startup programs, exit the Task Manager.
• After disabling all startup applications, close the Task Manager.
• Click on the Apply and OK button.
• Restart your PC.

Once the computer is started, check whether the wifi doesn’t have a valid IP configuration error is removed. If the error doesn’t appear anymore, then start enabling the programs one by one. It will help you to find out the culprit program and later remove this from your computer.

Wrap Up

This was all about the wifi doesn’t have a valid IP configuration error. Now, whenever this error appears on your computer, simply follow the above-mentioned solutions.

These solutions will surely fix the error on the Windows computer. Besides, these fixes are easy to perform and one doesn't need any prior technical knowledge.

So, with the end of this guide, I hope you enjoyed this article and found it useful in fixing the error.